CNC Routing

CNC routing is a computer-controlled machining process that uses a high-speed spindle and carbide end mills to shape sheet materials such as aluminum composite panels (ACM), HDPE, UHMW, polycarbonate, and plywood. Guided by CAD/CAM data, the machine follows tool paths that machine the material rather than melting it, producing clean edges and flat, dimensionally stable parts. With our standard 1/8" (3.18 mm) cutter, interior corners achieve a minimum radius of 1/16" (1.59 mm), while optimized feeds and speeds ensure clean chips, low heat buildup, and excellent finish on large panels.

Optimized for ACM, HDPE, UHMW, polycarbonate, and plywood.

CNC routing process

Compatible Materials

Discover all the materials we can precisely machine with our CNC router.

Technical Specifications

What you need to know about CNC routing

  • Optimized for ACM, HDPE, UHMW, polycarbonate, and Baltic birch.
  • Clean edges without vibrations, requiring little or no secondary sanding.
  • Consistent dimensional precision and repeatability.
  • Handles complex contours, drilling, engraving, and through-cuts in a single setup.
  • Minimum internal radius of 1/16" (1.59 mm) with a 1/8" (3.18 mm) tool.
  • Narrow kerf (~0.125" / 3.18 mm) maximizing material utilization and nesting density.
  • Little heat-affected cutting; clamping and suction limit vibrations and warping on thin panels.
  • Small holding tabs may remain at part edges.
    Visual explanation Small holding tabs visible on cut parts.